Solutions
Dyeing It Right
the First Time
The most expensive and most resource-hungry job in a plant is the batch that has to be dyed twice. Canlar Group machines are built around repeating the recipe exactly in every batch: the color in production is the color you approved on the sample — for your plant and for the planet alike.
Canlar Group in numbers
- 50+COUNTRIES
- 10,000+PROJECTS
- 30+YEARS OF EXPERIENCE
- 98%CUSTOMER SATISFACTION
Your Expectation, Our Answer
The Textile Industry’s Four Key Expectations from Technology
We sit at the same table with investors in more than 50 countries. The conversation comes down to the same four points every time; our machines were designed as the answer to those four points.
-
We want the color we approve in the lab to come out exactly the same in production.
A repeatable recipe
The recipe approved on the sample machine runs on the same curve in the production machine. The result does not change when the shift changes.
How we deliver itProportional dosing valve · conductivity measurement system · liter-based washing defined in kg/L -
Redyeing costs us both the margin and the delivery date.
Right the first time
Dyestuff and chemicals reach every point of the fabric at the same moment; shade variation and off-shade results are prevented before they form.
How we deliver itPatented double circulation (vertical + horizontal) · 20-second liquor cycle · full-length Teflon J-Box -
We cannot afford to lose production during commissioning.
Delivered ready to run
The machine is fully assembled and run before it leaves our factory. You meet no surprises on site.
How we deliver itHydrostatic pressure test · functional tests · control panels verified by simulation -
We do not want to be at the mercy of a supply chain for service and spare parts.
Our own production, fast support
Every part, from the vessel to the automation software, is produced in our own facility. You do not wait in an import queue for a spare part.
How we deliver itManufacturing under one roof · part records kept per machine · field and remote support
Sustainability
Our priority is sustainability
At Canlar Group the environmental approach is not a marketing headline but a design principle of the machine. Every saving is entered in two places at once: in your plant's books and in the planet's account.
The greenest batch is the one that is not dyed a second time. Every repeated dyeing means twice the water, twice the chemicals, twice the energy.
-
Water is measured, not estimated
The amount of water used in each batch is set by the automation; the same job is done with the same water every time.
How we deliver itElectromagnetic flowmeter · liter-based washing (LCWS) · low liquor ratioFor your plantWater and heating costs and the treatment load become predictable.
For the planetTextile finishing is one of the most water-intensive branches of industry. Water that is not used stays in the basin.
-
No more chemicals than needed
Salt and chemicals are added only as the process requires; residues after washing are monitored on screen.
How we deliver itConductivity measurement system · proportional dosingFor your plantChemical costs and the need for reprocessing are reduced.
For the planetSalt and dyestuff are among the hardest pollutants to treat in wastewater; reducing them at source is the most effective method.
-
Shorter heating, less steam
A high heat-transfer exchanger and efficient motors finish the same job in less time.
How we deliver itNon-welded heat exchanger · IE3–IE4 efficiency class motorsFor your plantSteam and electricity costs fall and capacity increases.
For the planetEvery cubic meter of steam burned is a direct carbon emission; a shorter process shortens the emission as well.
-
The most sustainable machine is the one you do not replace
A stainless steel body and robot welding keep the machine performing the same way for decades.
How we deliver it316L stainless fasteners · robot welding · certified stainless steel plateFor your plantThe need to reinvest is postponed and second-hand value is preserved.
For the planetEvery machine that is not built means steel, energy and transport that are not spent.
Our Strength
A production infrastructure that keeps its promise
Behind every assurance we give is a part we produced in our own facility.
-
1996onwards
manufacturing textile machinery
-
60,000m²
of covered production area
-
350
employees · 40 engineers
-
30+
countries with installations
-
Ministry-approved R&D Center
An R&D and Design Center approved by the Ministry of Industry and Technology. The technologies we develop are protected by patents and utility models.
-
Manufacturing to European standards
Production in accordance with AD 2000 Merkblatt, EN 13445 and ASME standards; certification by TÜV and independent inspection bodies.
-
Robot welding and CNC infrastructure
Robot welding, a 12 kW fiber laser, CNC tube laser and CNC punching: every machine is produced to exactly the same precision as the one before it.
-
One roof from start to finish
From sheet metal cutting to control panel assembly, from software to commissioning, the entire process is in our own facility. Responsibility sits at a single address.
Let us discuss your project together
Share your capacity, your fabric type and the quality level you are aiming for; let Canlar Group engineers determine the right configuration for your plant with you.